Select Page

PhaseCam 6010

This incredibly compact, on-axis interferometer puts vibration-immune measurement anywhere you need it

The lightweight, fiber-coupled measurement head is easy to position in test stands, remote mounting locations, and other challenging setups.

Laser Interferometer - 4D Technology PhaseCam 6010 Compact Twyman-Green Laser Interferometer

The PhaseCam® 6010 is an extremely small, lightweight dynamic laser interferometer for measuring optics and optical systems. With an easy-to-position, fiber-coupled measurement head, 4MP sensor and motorized controls, the PhaseCam 6010 is ideal for large, focal optical systems such as concave telescope mirrors and lens systems, as well as small-aperture, afocal components such as flat mirrors and collimators.

PhaseCam 6010 Specs

Configuration Twyman-Green interferometer
Acquisition Vibration insensitive dynamic
Wavelength 632.8 nm
Camera High res 4MP, 12-bit
Controls Motorized focus, beam blocks, contrast
Software 4Sight™ Focus included
Size Smallest: measurement head < 18 cm (7.1 in) long
Exposure Min. 30 µsec

The PhaseCam® 6010 is an extremely small, lightweight dynamic laser interferometer for measuring optics and optical systems. With an easy-to-position, fiber-coupled measurement head, 4MP sensor and motorized controls, the PhaseCam 6010 is ideal for large, focal optical systems such as concave telescope mirrors and lens systems, as well as small-aperture, afocal components such as flat mirrors and collimators.

 The PhaseCam 6010 incorporates Dynamic Interferometry® technology, using a single camera, high-speed optical phase sensor to make wavefront measurements in less than 30 microseconds—over 5000 times faster than a temporal phase shifting interferometer. Because acquisition time is so short, the PhaseCam can be used without vibration isolation or turbulence control, making it ideally suited for use in situ on production equipment, in clean rooms and in environmental test chambers.

Vibration insensitive

30 microsecond data acquisition time

Compact and lightweight

Small, easy-to-position measurement head mounts easily in tight quarters or remote applications

Reflectivity adjustment

Easily adjust for surfaces with reflectivity from  1% to 100%

Accessory optics

Numerous accessories and options, a fully developed product line.

data

analysis

software

Introducing 4Sight Focus

The all-new 4Sight Focus analysis software—included with all 4D interferometers and optical profilers—provides blazing fast acquisition, rich visuals, and a wealth of analysis features.

  • Fast acquisition and analysis
  • Clean, configurable interface
  • Simple to learn
  • Deep analysis capabilities
  • Easy data output
  • Smart integration and automation.
4Sight Focus Customizable Interferometer Analysis Software

PhaseCam and telescope optics

Check out our application page on telescope optics.

Added Technical Resources

h

Setting the Wedge Factor Tech Note

The Wedge Factor scales results to account for the geometry of an optical test setup. This tech note explains how to set the parameter for measuring wavefront error and surface height in common configurations.

h

White Paper - Space and Telescope Optics

Measurement of large optics requires metrology systems that can function despite vibration and other challenges.  Learn how it’s done in this white paper.

Get In Touch

(520) 294-5600

Location

3280 E Hemisphere Loop, Ste 146
Tucson, AZ 85706

Email

4Dinfo@ontoinnovation.com

Office Hours (Arizona Time)

Mon: 8am - 5pm
Tue: 8am - 5pm
Wed: 8am - 5pm
Thur: 8am - 5pm
Fri: 8am - 5pm
Sat: Closed
Sun: Closed

Send A Message